[Code of Federal Regulations]
[Title 26, Volume 16]
[Revised as of April 1, 2004]
From the U.S. Government Printing Office via GPO Access
[CITE: 26CFR48.4072-1]

[Page 104-105]
 
                       TITLE 26--INTERNAL REVENUE
 
    CHAPTER I--INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY 
                               (CONTINUED)
 
PART 48_MANUFACTURERS AND RETAILERS EXCISE TAXES--Table of Contents
 
 Subpart H_Motor Vehicles, Tires, Tubes, Tread Rubber, and Taxable Fuel
 
Sec. 48.4072-1  Definitions.

    For purposes of the regulations in this part, unless otherwise 
expressly indicated:
    (a) Rubber. The term ``rubber'' includes synthetic and substitute 
rubber.
    (b) Tread rubber. The term ``tread rubber'' means any material (1) 
which is commonly or commercially known as tread rubber or camelback, or 
(2) which is a substitute for any material commonly or commercially 
known as tread rubber or camelback and is of a type used in recapping or 
retreading

[[Page 105]]

tires. The term includes, for example, strips of material, wholly or 
partially of rubber, natural or synthetic, intended to be vulcanized or 
otherwise affixed to a tire casing to form the outside perimeter of the 
tire, smooth or treaded. It also includes treading material produced by 
reprocessing scrap, salvage, or junk rubber and a continuous rubber 
ribbon produced through an extrusion process for direct application in 
recapping or retreading a tire casing. The term does not include rubber 
in various forms such as strip, slab, pellet, etc. which is used as raw 
material for the extrusion process. Tread rubber loses its identity as 
such when it has been used in the recapping or retreading of a tire of a 
type used on a highway vehicle (without regard to the actual use 
ultimately made of the tire) or has deteriorated in quality to the point 
where it is no longer suitable for use in recapping or retreading of a 
tire. (In the case of such deterioration, see section 6416(b)(2) and 
Sec. 48.6416(b)-2 to secure a refund or credit of the tax paid.)
    (c) Tires of the type used on highway vehicles. (1) The term ``tires 
of the type used on highway vehicles'', for purposes of Sec. Sec. 
48.4071-1 through 48.4073-3 means tires of the type used on:
    (i) Motor vehicles that are highway vehicles (within the meaning of 
Sec. 48.4061(a)-1(d)), or
    (ii) Vehicles of the type used in connection with motor vehicles 
that are highway vehicles (within the meaning of Sec. 48.4061(a)-1(d)).

The term ``tires of the type used on highway vehicles'' does not include 
bicycle tires. Bicycle tires, however, are included in the term ``other 
tires'' as used in section 4071(a)(2).
    (2) For purposes of paragraph (c)(1)(i) of this section, tires of 
the type used on motor vehicles that are highway vehicles include tires 
used on motor trucks, buses, passenger automobiles, motor homes, highway 
tractors, trolley buses or coaches, and motorcycles.
    (3) For purposes of paragraph (c)(1)(ii) of this section, tires of 
the type used on vehicles of the type used in connection with motor 
vehicles that are highway vehicles include tires used on truck or bus 
trailers, truck semitrailers, mobile homes, housetrailers, or utility 
trailers.
    (d) Inner tubes. The term ``inner tubes'' includes air containers of 
all types made wholly or in part of rubber and designed and manufactured 
for use in pneumatic tires.
    (e) Tires. The term ``tires'' includes rubber casings, hoops, and 
strips or bands of all kinds designed and shaped or built to form the 
tread of or to fit a vehicle wheel. Tires of either the pneumatic or 
solid type which fit or form the tread for wheels of any article which 
is capable of use as a means of transporting a person or burden are 
taxable as tires. Examples of articles which may be equipped with 
taxable tires are motor scooters, minibikes, industrial trucks, farm 
tractors, wheelbarrows, and similar articles. See section 4073(a) and 
Sec. 48.4073-1 with respect to the exemption of tires of certain sizes, 
and section 4073(b) and Sec. 48.4073-2 with respect to the exemption 
for tires with internal wire fastening.
    (f) Laminated tires. For purposes of the tax imposed by section 
4071, the term ``laminated tires'' means tires (1) which are not ``tires 
of the type used on highway vehicles'' within the meaning of paragraph 
(c) of this section, and (2) which consist wholly of scrap rubber from 
used tire casings with an internal metal fastening agent.
    (g) Manufacturer. The term ``manufacturer'' means manufacturer, 
producer, or importer. A person who converts, by any process, a new tire 
taxable under section 4071 at one rate of tax into a tire taxable under 
section 4071 at a different rate (as for example, an off highway-type 
tire converted into a highway-type tire) is considered to be a 
manufacturer of the converted tire. If a conversion results in a reduced 
rate of tax for the converted tire, see section 6416(b)(2) and Sec. 
48.6416(b)-2 to secure a credit or refund of part of the tax paid. The 
term ``manufactured'' includes ``produced'' and ``imported''.
    (h) Cross references. For other definitions, see Sec. 48.0-2.


(Secs. 4071(b), 4071(c), 4073(c), and 7805, Internal Revenue Code of 
1954. (80 Stat. 331, 26 U.S.C. 4071(b); 68A Stat. 482, 26 U.S.C. 
4071(c); 70 Stat. 389, 26 U.S.C. 4073(c); 68A Stat. 917, 26 U.S.C. 
7805))


[T.D. 7809, 47 FR 6007, Feb. 10, 1982]

[[Page 106]]